Educated Design & Development has been named an company.
Top

Hipot Testing

Available with IEC/ISO 17025 Certificate of Calibration
Automated Digital Hipot Testers, models HP1000 & HP2000 Part of ED&D's leading-edge "Millennium Series" line of electrical testers Makes your job easy and safe!

Simply put, the Millennium Series testers from ED&D make all others obsolete. The world's fastest, easiest and most affordable automated dielectric withstand (hipot) testers. Also available with universal receptacle!

Please visit the Hipot Blog to learn more about Hipot Testing.
above: HP-1000 running AC dielectric withstand test
2. HP-1000 with HPA-01 Accessory Device
Product Details

  • 1 button testing - No setup required, just plug right in! Or, make a plug for your cordless product, and plug right in! EASY!
  • Easy to identify PASS / FAIL visible and audible indication
  • Auto Test Time (1 sec. / 60 sec.)+ - No need to set a timer or clock watch
  • Safety Protected Start Switch -- Protects user from shock!
  • Performs the Low Current Ground Continuity test at the same time
  • Meets UL, CSA, CE, EN, IEC, MIL and all other international safety agency requirements as well as UL 120Kohm requirements
  • Includes ISO/IEC 17025 Accredited Calibration Certificate, accredited by ACLASS (Internationally accepted results... equivalent to A2LA)


Test Voltage 100 - 3000 VAC True RMS Accuracy ± 1% Full Scale
Input Current 1 A Weight 15 lbs
Input Frequency 50 - 60 Hz Input Voltage 100 - 200 or 220 - 240 VAC (Specify when ordering)
Test Time 1 sec or 60 sec (selectable)++ Dimensions 12" x 11" x 5"
Failure Indication ARC detection / Trip current limit 10 mA
+ Order Model HP-1000S if you require a 2 sec. / 60 sec. test time.

++ When purchasing our HP-1000, if you are requiring both 1 sec. and 60 sec. tests, please specifiy that you need selectable test time so that your unit can be configured accordingly.
above: 1.HP-2000 with standard socket
Product Details

  • 1 button testing - No setup required, just plug right in! Or, make a plug for your cordless product, and plug right in! EASY!
  • Easy to identify PASS / visible and audible FAIL indication
  • Auto Test Time (1 sec. / 60 sec.)+ - No need to set a timer or stop watch
  • Safety Protected Start Switch -- Protects user from shock!
  • Performs the Low Current Ground Continuity test at the same time
  • Meets UL, CSA, CE, EN, IEC, MIL and all other international safety agency requirements as well as UL 120Kohm requirements
  • Includes ISO/IEC 17025 Accredited Calibration Certificate, accredited by ACLASS (Internationally accepted results - equivalent to A2LA)

TECH NOTE: We get numerous calls from users who are looking for AC hipot testers with high output current capabilities. In almost every case, the user actually needed a DC hipot tester. When hipot testing products that incorporate EMI filters (for EMC regulations), you need to use DC, not AC!

With AC, the Y capacitors in the EMI filter will conduct current, causing false failure indications and possibly damaging these capacitors. Most "high-tech" standards anticipate this and permit DC testing at 1.414 times the AC test voltage. This includes IEC950, IEC1010, and IEC601 based Standards.
Test Voltage 0 - 3000 VAC True RMS
100 - 4250 VDC
Accuracy ± 1% Full Scale
Input Current 1 A Weight 15 lbs
Input Frequency 50 - 60 Hz Input Voltage 100 - 200 or 220 - 240 VAC (Specify when ordering)
Test Time 1 sec or 60 sec (selectable)++ Dimensions 12" x 11" x 5"
Failure Indication ARC detection / Trip current limit 10 mA
+ Order Model HP-2000S if you require a 2 sec. / 60 sec. test time.

++ When purchasing our HP-2000, if you are requiring both 1 sec. and 60 sec. tests, please specifiy that you need selectable test time so that your unit can be configured accordingly.
HPA-01 Automated Hipot Accessory Device
above: Accessory for testing the dielectric withstand strength of insulating materials
Purpose
To test thin insulating materials for dielectric voltage withstand strength when connected to a hipot tester (ex. transformer insulating materials, circuit board insulation, etc...)

Construction
Built in accordance with IEC60065, EN60065, UL6500

Rated
5KVAC/5KVDC
[HOME] [ABOUT] [CALIBRATION] [STORE FRONT] [CONTACT]

Educated Design & Development, Inc.

901 SHELDON DRIVE

Cary, NC 27513 USA

Tel: 800-806-6236

Tel: (Int.) 001-919-469-9434

Fax: 919-469-5743

Educated Design & Development, Inc. © 2011 All Rights Reserved.
ED&D products are RoHS, REACH, and Conflict-Minerals Free

[Hipot Testers] [Ground Continuity Testing] [Leakage Current Testing] [Accessibility Probes] [Impact Testing]
[Temperature Measurement] [Voltage Current & Power Measurement] [Force & Torque Measurement] [Power Control]
[Loading Devices] [Flame & Other Plastics Testing] [Ingress Protection Testing] [Plug, Socket & Cord Testing]
[Breaking Capacity Testing] [Abnormal Testing] [Environmental Testing] [Creepage & Clearance Testing] [Other Safety Products]
[Safety Labels] [Toy Testing]