Educated Design & Development has been named an company.
Top

IP Code Testing

Available with IEC/ISO 17025 Certificate of Calibration
Ingress Protection Test Equipment is used to determine the degree of protection provided by a product enclosure. The level of protection provided by an enclosure is represented by an "IP" code (i.e. IP43). The first digit indicates protection against ingress of solid foreign objects. Many of these tests require accessibility probes. The equipment for these tests is provided below. All equipment fully complies with IEC 60529 (IP Code standard) and all other international standards with similar tests.

IP Code PROBES All Products (IP Code Testing)
1X Protection against objects >50mm X1 Protection against vertically dripping water
2X Protection against objects >12.5mm X2 Dripping water ± 15° from vertical
3X Protection against objects >2.5mm X3 Protection against spraying water
4X Protection against objects >1.0mm X4 Protection against splashing water
5X Dust Protected (limited ingress) X5 Protection against low pressure jetting water
6X Dust Tight Protection X6 Protection against high pressure jetting water
UL UL Standard Test Equipment X6K Extremely high pressure jetting water

IP3X

TPK-05 Test Probe Kit™
above: Probe Kit ready-to-ship in custom-cut foam padded carrying case
Product Details

The TPK-05 was designed to provide the probes required by UL / IEC / EN 60529, the IP Code standard. It includes the following:
  • IEC Jointed Finger Probe (w/ banana jack in handle) (TFP-01)
  • 2.5 mm Test Rod (TRP-01)
  • 1.0 mm Test Wire (TRP-02)
  • Test Sphere Probe with handle (TSP-01)
  • Test Sphere Probe (small) (TSP-02)
  • NIST-traceable Certificate included. ISO/IEC 17025 Accredited Calibration with Data available for an additional fee. We are "in scope" and it specifically lists us for "Accessibility Probes"! (data is available separately)
  • Custom-cut padded carrying case
  • One year warranty
  • Free expert level technical support

TRP-01 2.5mm Test Rod
Product Details

Used to verify the protection of persons against access to hazardous parts. Also used to verify the protection against access with a tool. Meets IEC and EN Standards including IEC 60529 and IP3 and suffix C codes. The handle and stop face are made of Delrin®. The rod is made of stainless steel.
IEC61032-Probe C-Figure 3
[HOME] [ABOUT] [CALIBRATION] [STORE FRONT] [CONTACT]

Educated Design & Development, Inc.

901 SHELDON DRIVE

Cary, NC 27513 USA

Tel: 800-806-6236

Tel: (Int.) 001-919-469-9434

Fax: 919-469-5743

Educated Design & Development, Inc. © 2011 All Rights Reserved.
ED&D products are RoHS, REACH, and Conflict-Minerals Free

[Hipot Testers] [Ground Continuity Testing] [Leakage Current Testing] [Accessibility Probes] [Impact Testing]
[Temperature Measurement] [Voltage Current & Power Measurement] [Force & Torque Measurement] [Power Control]
[Loading Devices] [Flame & Other Plastics Testing] [Ingress Protection Testing] [Plug, Socket & Cord Testing]
[Breaking Capacity Testing] [Abnormal Testing] [Environmental Testing] [Creepage & Clearance Testing] [Other Safety Products]
[Safety Labels] [Toy Testing]