Educated Design & Development has been named an company.
Top

IP Code Testing

Available with IEC/ISO 17025 Certificate of Calibration
Ingress Protection Test Equipment is used to determine the degree of protection provided by a product enclosure. The level of protection provided by an enclosure is represented by an "IP" code (i.e. IP43). The first digit indicates protection against ingress of solid foreign objects. Many of these tests require accessibility probes. The equipment for these tests is provided below. All equipment fully complies with IEC 60529 (IP Code standard) and all other international standards with similar tests.

IP Code PROBES All Products (IP Code Testing)
1X Protection against objects >50mm X1 Protection against vertically dripping water
2X Protection against objects >12.5mm X2 Dripping water ± 15° from vertical
3X Protection against objects >2.5mm X3 Protection against spraying water
4X Protection against objects >1.0mm X4 Protection against splashing water
5X Dust Protected (limited ingress) X5 Protection against low pressure jetting water
6X Dust Tight Protection X6 Protection against high pressure jetting water
UL UL Standard Test Equipment X6K Extremely high pressure jetting water

IPX2

STC-DBX Combo Drip Box & Spray Test Chambers
Product Details

  • 110-120 or 220-240 VAC
  • 50-60 Hz
  • 10 A
  • Rated for indoor use between 10 - 40° C
  • Designed for IPX3 & IPX4 testing;
    also capable of IPX1 & IPX2 testing
  • Spray Tube radius options:
    1. 200mm
    2. 400mm
    3. 600mm (Model STC-DBX-600 ONLY)


Model Maximum Oscillating Tube Drip Box Specifications Turntable Diameter External Dimensions (cm)
W x H x D
STC-DBX-400 R = 400 mm 800mm x 800mm 800mm 201 x 264 x 180
STC-DBX-600 R = 600 mm 1000mm x 1000mm 1000mm 222 x 274 x 200
DBX Drip Box Test Systems™
above: DBX-800
Product Details

For checking the protection against water to prove the degrees of protection with the second number X1. "Protection against vertical dripping of water" and X2. "Protection against dripping water at 15° tilt." These are the highest quality, precision-machined Drip Boxes available anywhere in the world! This is the complete system with hermetically tight drip box, specimen grate, flow control valve, shut off valve, hosing, connectors, and replacement drip valves. Various models available offering different sizes and either wall or ceiling mount options.

Model Width Length
DBX-400 400 mm 300 mm
DBX-800 800 mm 400 mm
DBX-1000 1000 mm 500 mm
ET1 IP Code Turntables
above: ET1-25 IP Turntable
To carry and rotate the specimens when determining the protection against water.

Standard Outfit:
  • Extremely Versatile -- fully Waterproof and Portable!
  • 1 tabletop with apron, circular, pivoted on a ball bearing turning rim, height of tabletop above floor approx. 220 mm.
  • 1 frame with AC geared motor, with additional gear reduction to 1 +0.1 rpm, with 4 height adjustable caster wheels, 2 of them lockable.
  • 1 Swivel Accessory Unit
NOTE: The Telescope Support (shown in picture) is sold separately for holding/lifting specimens (added convenience).



Model Table Diameter Carrying Capacity
ET1-25 730 mm 150 Kg
ET1-26 850 mm 150 Kg
ET1-27 1050 mm 150 Kg
OCS-PER Perforated Specimen Stand
above: Turntable Telescoping stand
Product Details
  • This is an optional accessory device for the turntables.
  • This product has a perforated-top grid for stand / product placement

[HOME] [ABOUT] [CALIBRATION] [STORE FRONT] [CONTACT]

Educated Design & Development, Inc.

901 SHELDON DRIVE

Cary, NC 27513 USA

Tel: 800-806-6236

Tel: (Int.) 001-919-469-9434

Fax: 919-469-5743

Educated Design & Development, Inc. © 2011 All Rights Reserved.
ED&D products are RoHS, REACH, and Conflict-Minerals Free

[Hipot Testers] [Ground Continuity Testing] [Leakage Current Testing] [Accessibility Probes] [Impact Testing]
[Temperature Measurement] [Voltage Current & Power Measurement] [Force & Torque Measurement] [Power Control]
[Loading Devices] [Flame & Other Plastics Testing] [Ingress Protection Testing] [Plug, Socket & Cord Testing]
[Breaking Capacity Testing] [Abnormal Testing] [Environmental Testing] [Creepage & Clearance Testing] [Other Safety Products]
[Safety Labels] [Toy Testing]