Educated Design & Development has been named an company.
Top

IP Code Testing

Available with IEC/ISO 17025 Certificate of Calibration
Ingress Protection Test Equipment is used to determine the degree of protection provided by a product enclosure. The level of protection provided by an enclosure is represented by an "IP" code (i.e. IP43). The first digit indicates protection against ingress of solid foreign objects. Many of these tests require accessibility probes. The equipment for these tests is provided below. All equipment fully complies with IEC 60529 (IP Code standard) and all other international standards with similar tests.

IP Code PROBES All Products (IP Code Testing)
1X Protection against objects >50mm X1 Protection against vertically dripping water
2X Protection against objects >12.5mm X2 Dripping water ± 15° from vertical
3X Protection against objects >2.5mm X3 Protection against spraying water
4X Protection against objects >1.0mm X4 Protection against splashing water
5X Dust Protected (limited ingress) X5 Protection against low pressure jetting water
6X Dust Tight Protection X6 Protection against high pressure jetting water
UL UL Standard Test Equipment X6K Extremely high pressure jetting water

IPX4

SNZ-01 Hand Held Spray Nozzle
above: IPX3 and IPX4 Spray Nozzle
Product Details

For checking the protection against water, to prove the degree of protection IPX3 and IPX4. Positioning of the shield allows for both "Protection against Spraying Water" and "Protection against Splashing Water" tests. The spray tester is the low cost alternative to the Oscillating Spray test for IPX3 and IPX4. Complete test device includes nozzle head, moving shield, pressure gauge, handle, flow control and shut off valve, and any connecting hose. Spherical cap of the spray nozzle is nickel-plated brass, all other metallic parts of stainless or nickel-plated steel.

STC-DBX Combo Drip Box & Spray Test Chambers
Product Details

  • 110-120 or 220-240 VAC
  • 50-60 Hz
  • 10 A
  • Rated for indoor use between 10 - 40° C
  • Designed for IPX3 & IPX4 testing;
    also capable of IPX1 & IPX2 testing
  • Spray Tube radius options:
    1. 200mm
    2. 400mm
    3. 600mm (Model STC-DBX-600 ONLY)


Model Maximum Oscillating Tube Drip Box Specifications Turntable Diameter External Dimensions (cm)
W x H x D
STC-DBX-400 R = 400 mm 800mm x 800mm 800mm 201 x 264 x 180
STC-DBX-600 R = 600 mm 1000mm x 1000mm 1000mm 222 x 274 x 200
above: OTU-1600 with sample
Product Details
  • Completely adjustable tube height system allows moving the tube up/down to quickly establish the maximum 200 mm spacing from the spray nozzles as specified in the standards.
  • Completely adjustable tube mounting system = allows for different size spray tubes to be easily installed.
  • Folds to the wall when not in use (very beneficial)-the entire top beam and tube drive system has an integral heavy pin system that allows it to be folded to the wall in seconds after use = no far end tube support mouned to the floor!
  • Automated System = automatically stops tube rotation and water flow at the precise test time! Also includes manual mode for flexibility.
  • Dual Flow Gauges = allow for accurate reading of flow rate for the full range of tube sizes (small tubes use 0-1 L/min gauge; larger tubes use 0-5 L/min gauge).


System Electrical Ratings 120 or 240 VAC (order as needed),50-60 Hz., 15 A Operator Control Dimensions: 8.5 in. D x 20.5 in. W x 22.0 in. H (21.6 x 52.0 x 58.9 cm)
Oscillating Speed: 4 sec. for 2 x 120° for IPX3 (10 RPM)
12 sec. for 2 x 360° for IPX4 (10 RPM)
Operator Control Weight: 50 lbs. (11.3 Kg)
Oscillating Angles IPX3: 60° from center (120° total)
IPX4: 360° from center (near 360° total)
(Standard accepts lesser angle to allow room for sample support)
Water Control Dimensions 7.0 in. D x 29.0 in. W x 21.5 in. H (17.8 x 54.6 x 73.7 cm)
Tube Radius Size Options 200 mm, 400 mm, 600 mm, 800 mm, 1000 mm
(Larger system available for 1200 mm, 1400 mm, and 1600 mm tubes)
Water Control Weight 25 lbs. (11.3 Kg)
Drive System Dimensions 118.0 in. D x 20.5 in. W x 22.0 in. H (299.7 x 49.5 x 248.4 cm) Flow Meters 0-1 L/min
0-5 L/min
Drive System Weight 311 lbs. (141.0 Kg)
ET1 IP Code Turntables
above: ET1-25 IP Turntable
To carry and rotate the specimens when determining the protection against water.

Standard Outfit:
  • Extremely Versatile -- fully Waterproof and Portable!
  • 1 tabletop with apron, circular, pivoted on a ball bearing turning rim, height of tabletop above floor approx. 220 mm.
  • 1 frame with AC geared motor, with additional gear reduction to 1 +0.1 rpm, with 4 height adjustable caster wheels, 2 of them lockable.
  • 1 Swivel Accessory Unit
NOTE: The Telescope Support (shown in picture) is sold separately for holding/lifting specimens (added convenience).



Model Table Diameter Carrying Capacity
ET1-25 730 mm 150 Kg
ET1-26 850 mm 150 Kg
ET1-27 1050 mm 150 Kg
OCS-PER Perforated Specimen Stand
above: Turntable Telescoping stand
Product Details
  • This is an optional accessory device for the turntables.
  • This product has a perforated-top grid for stand / product placement

P18 Spray Test Chambers
above: P18 featuring welded steel frame
Product Details

This product is designed with a welded steel frame, steel panels, all powder coated blue, with adjustable feet.

Model Maximum Oscillating Tube Internal Dimensions (mm)
W x H x D
External Dimensions (mm)
W x H x D
Turntable Diameter
P18.12 R = 400 mm 950 x 950 x 950 1700 x 1900 x 1150 580 mm
P18.14 R = 600 mm 1350 x 1350 x 1350 2200 x 1950 x 1650 730 mm
[HOME] [ABOUT] [CALIBRATION] [STORE FRONT] [CONTACT]

Educated Design & Development, Inc.

901 SHELDON DRIVE

Cary, NC 27513 USA

Tel: 800-806-6236

Tel: (Int.) 001-919-469-9434

Fax: 919-469-5743

Educated Design & Development, Inc. © 2011 All Rights Reserved.
ED&D products are RoHS, REACH, and Conflict-Minerals Free

[Hipot Testers] [Ground Continuity Testing] [Leakage Current Testing] [Accessibility Probes] [Impact Testing]
[Temperature Measurement] [Voltage Current & Power Measurement] [Force & Torque Measurement] [Power Control]
[Loading Devices] [Flame & Other Plastics Testing] [Ingress Protection Testing] [Plug, Socket & Cord Testing]
[Breaking Capacity Testing] [Abnormal Testing] [Environmental Testing] [Creepage & Clearance Testing] [Other Safety Products]
[Safety Labels] [Toy Testing]