Educated Design & Development has been named an company.

IP Code Testing

Available with IEC/ISO 17025 Certificate of Calibration
Ingress Protection Test Equipment is used to determine the degree of protection provided by a product enclosure. The level of protection provided by an enclosure is represented by an "IP" code (i.e. IP43). The first digit indicates protection against ingress of solid foreign objects. Many of these tests require accessibility probes. The equipment for these tests is provided below. All equipment fully complies with IEC 60529 (IP Code standard) and all other international standards with similar tests.

IP Code PROBES All Products (IP Code Testing)
1X Protection against objects >50mm X1 Protection against vertically dripping water
2X Protection against objects >12.5mm X2 Dripping water ± 15° from vertical
3X Protection against objects >2.5mm X3 Protection against spraying water
4X Protection against objects >1.0mm X4 Protection against splashing water
5X Dust Protected (limited ingress) X5 Protection against low pressure jetting water
6X Dust Tight Protection X6 Protection against high pressure jetting water
UL UL Standard Test Equipment X6K Extremely high pressure jetting water


JET-02 12.5mm Jet Nozzle
Product Details

12.5mm Jet Nozzle for IPX6 test

above: IPX5 & IPX6 Jet Test Kit
Product Details

Jet Nozzle Kits for protection against ingress of water (IPX5 and IPX6).

Model Nozzle Diameter IP Code
JET-01 6.3 mm IPX5
JET-02 12.5 mm IPX6
JET-04 Deluxe Jet Nozzle Kit™

JET-50 [UL50E]

Complies with ANSI, CSA, UL, IEC, EN, CE, and VDE requirements. Each of these devices is high-precision manufactured. Unit comes with ISO 17025 compliant NIST-traceable certificate of calibration. Measurement data is available at an additional fee, padded protective case included and tech support are included.

JET-03 [IEC60529 & DIN40050]

Jet Nozzle Kit for protection against ingress of water (IPX5 and IPX6).
  • 6.3mm Jet Nozzle
  • 12.5mm Jet Nozzle
  • Compatible with ED&D Exclusive WTR-01 Water Supply System
  • Durable, Hard Plastic Carrying Case

WTR-01 Water Test Reservoir and Pump System
above: Integrated Spray and Jet Test Water Reservoir
Product Details

This ED&D EXCLUSIVE system includes the water tank (492 Liters/ 130 Gallons), water pump, ball valve and unions, 100 psi pressure gauge, plumbing and hosing on a heavy duty hard plastic pallet. A complete integrated system! The system operates on 240V, 60Hz - - but other voltages and power requirements are available by special request. The system was designed by ED&D for the purpose of producing the required levels of pressure to perform the IP Code jet nozzle tests.

ET1 IP Code Turntables
above: ET1-25 IP Turntable
To carry and rotate the specimens when determining the protection against water.

Standard Outfit:
  • Extremely Versatile -- fully Waterproof and Portable!
  • 1 tabletop with apron, circular, pivoted on a ball bearing turning rim, height of tabletop above floor approx. 220 mm.
  • 1 frame with AC geared motor, with additional gear reduction to 1 +0.1 rpm, with 4 height adjustable caster wheels, 2 of them lockable.
  • 1 Swivel Accessory Unit
NOTE: The Telescope Support (shown in picture) is sold separately for holding/lifting specimens (added convenience).

Model Table Diameter Carrying Capacity
ET1-25 730 mm 150 Kg
ET1-26 850 mm 150 Kg
ET1-27 1050 mm 150 Kg
OCS-PER Perforated Specimen Stand
above: Turntable Telescoping stand
Product Details
  • This is an optional accessory device for the turntables.
  • This product has a perforated-top grid for stand / product placement


Educated Design & Development, Inc.


Cary, NC 27513 USA

Tel: 800-806-6236

Tel: (Int.) 001-919-469-9434

Fax: 919-469-5743

Educated Design & Development, Inc. © 2011 All Rights Reserved.
ED&D products are RoHS, REACH, and Conflict-Minerals Free

[Hipot Testers] [Ground Continuity Testing] [Leakage Current Testing] [Accessibility Probes] [Impact Testing]
[Temperature Measurement] [Voltage Current & Power Measurement] [Force & Torque Measurement] [Power Control]
[Loading Devices] [Flame & Other Plastics Testing] [Ingress Protection Testing] [Plug, Socket & Cord Testing]
[Breaking Capacity Testing] [Abnormal Testing] [Environmental Testing] [Creepage & Clearance Testing] [Other Safety Products]
[Safety Labels] [Toy Testing]