Leakage Current Testers -- Electrical Current Safety Test Equipment

Fast - All operator controls are located on the front panel to expedite testing. The entire test can be performed in a matter of seconds! Pays for itself in time and stress savings.
Versatile - Measures Leakage Current in accordance with UL, CSA, EN, and IEC/ International Standards. Includes ability to perform open neutral, open ground, and line polarity forward/reverse test conditions.
Adaptable - Universal rear panel receptacle allows for testing products with any plug configuration.
Accurate - True RMS meter accurately measures both sinusoidal and non-sinusoidal waveshapes. This is important when testing products using a switch mode power supply which can generate non-sinusoidal leakage currents. Calibrated, traceable to NIST.
Flexible - A front panel switch permits testing either through the power cord of the product under test, from surface/ patient connection-to-ground, or from surface/ patient connection-to-surface/ patient connection.
Portable - Lightweight, with integral handle.
Other Features - Product Ground Switching (grounding conductor maintained to device under test when not measuring leakage). Automatic front receptacle disconnect when configured in the 240V test mode (prevents inadvertent connection of 120V when configured for 240V operation).
Proven - These are the only leakage current testers designed and supported by Product Safety experts. That is part of the reason why they have become the standard in the industry. Full technical support by experienced safety engineers.

(More Images)

above: Model LT-15

Product Details

Laboratory, Production Line, and Field Testing in accordance with UL, IEC, CSA, EN and CE requirements.

Features product ground switching (grounding conductor maintained to device under test when not measuring leakage).
Automatic front receptacle disconnect when configured in the 240V test mode (prevents inadvertent connection of 120V when configured for 240V operation).
These are the only leakage current testers designed and supported by product safety experts.
These testers come fully setup, ready to use, and are calibrated by our unique in the world ACLASS accredited Calibration Lab.
Full technical support available by experienced safety engineers.

Input / Output Ratings	100 -120 / 200-240 VAC 15 A 50-60 Hz	Dimensions Weight	13.25 in. W x 11.5 in. D x 5.5 in. H 9 lbs.
Testing Tolerance	90 -132 / 180 - 264 VAC	Measurement Ranges	2 mA/Resolution: 1.0 μA, Accuracy: ±1% full scale 20 mA/Resolution: 10.0 μA, Accuracy: ±1% full scale
Leakage Current Measurement Switch	Can be measured through: product power cord ground conductor; Surface-to-Line 1/Line 2 OR Ground; Surface-to-Surface	Body Impedance Circuits	1500 Ω, 1% resistance shunted by 0.15 μF, 1% capacitance per IEC 60950 2nd edition, IEC 61010, IEC 60335, IEC 60065, and others based on IEC 60 standards
Display	3.5 in. digital LCD display

(More Images)

above: Model LT-30HC

Product Details

Features product ground switching (grounding conductor maintained to device under test when not measuring leakage).
Automatic front receptacle disconnect when configured in the 240V test mode (prevents inadvertent connection of 120V when configured for 240V operation).
These are the only leakage current testers designed and supported by product safety experts.
These testers come fully setup, ready to use, and are calibrated to meet A2LA specifications.
Full technical support available by experienced safety engineers.

Input / Output Ratings	100 -120 / 200-240 VAC 30 A 50-60 Hz	Dimensions Weight	13.25 in. W x 11.5 in. D x 5.5 in. H 13 lbs.
Testing Tolerance	90 -132 / 180 - 264 VAC	Measurement Ranges	2 mA/Resolution: 1.0 μA, Accuracy: ± 1% full scale 20 mA/Resolution: 10.0 μA, Accuracy: ±1% full scale
Leakage Current Measurement Switch	Can be measured through: product power cord ground conductor; Surface-to-Line 1/Line 2 OR Ground; Surface-to-Surface	Body Impedance Circuits	1500 Ω, 1% resistance shunted by 0.15 μF, 1% capacitance per IEC 60950 2nd edition, IEC 61010, IEC 60335, IEC 60065, and others based on IEC 60 standards
Display	3.5 in. digital LCD display

(More Images)

above: Model LT-601

Product Details

The LT-601 and LT-601HC meets UL, CSA, CE, EN, IEC, MIL standards... These devices also meet standards for Medical product safety testing!

A front panel switch permits Leakage Current to be measured:

Through product's power cord ground conductor
Surface/Patient-to-Ground
Patient-to-Patient

Meets Requirements for Testing Standard(s) including but not limited to:UL 1703 IEC 60601

Input Ratings	LT-601: 100-120/200-240 VAC 15 A 50-60 Hz LT-601HC: 100-120/200-240 VAC 30 A 50-60 Hz Testing tolerance: 90-132 / 180-264 VAC	Mechanical	Size: 13.25 in. W x 11.5 in. D x 5.5 in. H LT-601: Weight: 9 lbs. LT-601HC Weight: 13 lbs.
Output Ratings	Same as input ratings	Measurement Ranges	200 mA/Resolution: 1.0 μA, Accuracy: ± 1% full scale 2000 mA/Resolution: 10.0 μA, Accuracy: ± 1% full scale
Display	3.5 in. digital LCD display	Body Impedance Circuits	Network in accordance with IEC 60601, EN 60601, CSA 601, UL 2601

(More Images)

above: Model LT-952

Product Details

Test can be performed in seconds! Pays for itself in time and stress savings.

Universal rear panel receptacle allows for testing products with any plug configuration.
True RMS meter measures sinusoidal and non-sinusoidal waveshapes... (Important when testing products using switch mode power supply which can generate non-sinusoidal leakage currents).
Calibrated, traceable to NIST.
Lightweight, with integral handle.
Meets UL, CSA, CE, EN, IEC and all other international safety agency requirements.

Meets Requirements for Testing Standard(s) including but not limited to:EN 61010 CSA 950 UL 60950 EN 60950 IEC 60950 IEC 61010 IEC 60335

Input Ratings	LT-952: 100-120/200-240 VAC 15 A 50-60 Hz LT-952HC: 100-120/200-240 VAC 30 A 50-60 Hz Testing tolerance: 90-132 / 180-264 VAC	Mechanical	Size: 13.25 in. W x 11.5 in. D x 5.5 in. H LT-952: Weight: 9 lbs. LT-952HC Weight: 13 lbs.
Output Ratings	Same as input ratings	Measurement Ranges	2 mA/Resolution: 1.0 μA, Accuracy: ± 1% full scale 20 mA/Resolution: 10.0 μA, Accuracy: ± 1% full scale
Display	3.5 in. digital LCD display	Body Impedance Circuits	Body Circuit per IEC 60950 2nd edition, IEC 61010, IEC 60335, IEC 60065, and others based on IEC 60 standards

(More Images)

above: Model AVO-LT1

Product Details

Custom designed low capacitance transformer provides high isolation
Safety features include line isolation, a voltage applied warning lamp, safety banana jacks, and an output current limiter
Input and output voltage ranges from 90-264 VAC without having to change a range switch
A separate set of output jacks is provided for connecting an external output monitoring meter

Meets Requirements for Testing Standard(s) including but not limited to:IEC 60601

Input Ratings	100 - 240 VAC less than 0.1 A 50/60 Hz	Isolation Method	Low leakage custom designed transformer
Output Voltage	1:1 isolation of input voltage	Size	6-1/8" W x 3-1/4" H x 6-1/4" D
Current	5 mA max. @ 240 VAC	Weight	2 lbs. (1 Kg)
Impedance	47 Kohm

(More Images)

15 Amp power cord for Leakage Current Testers

(More Images)

30 Amp Cord for Leakage Current Testers

(More Images)

Leads provide connection to the banana jacks installed in the front of the unit and used to measure the leakage between any two surfaces on the product under test.

(More Images)

Device Under Testing (DUT) replacement plug for LT-30HC

[HOME] [ABOUT] [CALIBRATION] [STORE FRONT] [TECH SUPPORT] [CONTACT]

Educated Design & Development, Inc.

901 SHELDON DRIVE

Cary, NC 27513 USA

Email: info@ProductSafeT.com

Tel: 800-806-6236

Tel: (Int.) 001-919-469-9434

Fax: 919-469-5743

URL: www.ProductSafeT.com

[Hipot Testers] [Ground Continuity Testing] [Leakage Current Testing] Accessibility Probes] [Impact Testing]
[Temperature Measurement] [Voltage Current & Power Measurement] [Force & Torque Measurement] [Power Control] [Loading Devices] [X-Radiation Testing] [Flame & Other Plastics Testing] [Ingress Protection Testing] [Plug, Socket & Cord Testing] [Breaking Capacity Testing] [Abnormal Testing] [Environmental Testing] [Creepage & Clearance Testing] [Other Safety Products] [Safety Labels]