GROUND CONTINUITY TESTING
Introducing the GC 1000
ED&D's new automatic tester from the Millennium Series

GC1000 Ground Impedance Tester

 

ALSO AVAILABLE
WITH UNIVERSAL RECEPTACLE
(Accepts most plug configurations)!

 

 Introducing the world’s fastest, easiest, and most affordable Automated digital Ground Continuity tester. Simply put, the new Millennium Series GC1000 tester from ED&D makes all others obsolete. This is the only such tester available produced by experts in Product Safety!

SPECIAL FEATURES

  • Meets UL, CSA, TUV, CE, EN and IEC requirements
  • 1 Button Testing - Just plug in and press Start !
  • Conveniently located custom front panel AC receptacle accepts 120 and 240 plug configurations.
  • Digital LED Display reads out in Ohms
  • Selectable Test Current: 25 or 30 amps
  • Selectable Test Time: 1 second or 60 seconds
  • Display holds data after test. Visible and audible fail indication.
  • Special Feature: Zero feature allows you to “zero-out” the test lead impedance (return lead and products power cord).

BROCHURE

Made in USA
Test Current 25A or 30A (Selectable) Accuracy ± 2%
Input Current 1A Weight 15 lbs
Input Frequency 50 - 60 Hz Input Voltage 100-120 or 200- 220 VAC (Order as Desired)
Test Time 1 sec. / 60 sec. (Selectable)

2 sec. available 		Dimensions 12” W x 11” D x 5" H
Failure Indication      0.1 ohm trip setting (0.2 ohm available)

Technical Note: In the standards, the 0.1 ohm limit is for the product under test’s grounding system only, not including the power cord impedance. Our “zero” feature allows you to zero out the cord impedance. This insures no false failures and extremely accurate results!

***INTRODUCING***
GC-1000S - Ground Impedance Tester
Same great unit and features as the GC-1000.
Test Time: 2 sec. / 60 sec. (Selectable)

GC-2000 - Ground Impedance Tester
Same great unit and features as the GC-1000,
Test Current:  25A or 40A selectable

INSULATION RESISTANCE TESTING

Model

Test Voltage (VDC)

Range

Power Source

Display

22232E

500, 1000

0-1000 M

Batteries

Analog / Digital

8000E

100, 250, 500, 1000

0-2000 M

Hand Cranked

Analog

8003E

100, 250, 500, 1000

0-20,000 M

Hand Cranked

Analog

8012E

500, 1000, 2500, 5000

Text Box: Any item that carries electrical current is covered with some type of insulation.  The insulation restricts the flow of current between different conductors and between conductors and ground.  The insulation system is subject to stress, and contamination over time.  If the insulation system fails it can be very costly.  An IR Test measures the electrical insulation resistance of the system. The test may be done as a quick check after an item is manufactured, installed or repaired.  It is also a useful test to perform when doing preventative maintenance on an item over time.  Changes in the insulation measurement can help to predict an incipient failure of an item such as a motor, cable or component. The IR Test is performed with a DC potential.  This DC potential is impressed across the insulation system between circuits and/or ground and the resulting currents are measured.  The meter is usually scaled in Megohms which is the ratio of the DC voltage versus the measured current (R=E/1).  The two most common IR Test's are Polarization Index and Dielectric Absorption. 0-100,000 M

Rechargeable

Analog

[HOME]
 [About] [Contact Us] [STORE FRONT] [Hipot Testers] [Ground Continuity Testing] [Insulation Resistance Testing] [Leakage Current Testing] Accessibility Probes] [Impact Testing] [Temperature Measurement] [Voltage Current & Power Measurement] [Force & Torque Measurement] [Power Control] [Loading Devices] [X-Radiation Testing] [Flame & Other Plastics Testing] [Ingress Protection Testing] [Plug, Socket & Cord Testing] [Abnormal Testing] [Environmental Testing] [Creepage & Clearance Testing] [Other Safety Products] [Safety Labels] [Educational Publications]