Educated Design & Development has been named an company.

Other Safety Products

Available with IEC/ISO 17025 Certificate of Calibration
H06.10 Surge Tester
Product Description

  • High voltage supply 10 kV DC 1.5 mA
  • Voltage indicating instrument with digital measurement display
  • High voltage capacitor 1 nF
  • Switch S according to Fig. 7a
  • Interval pulser to control switch
  • 2 Sockets in the testing cabinet to connect the specimen
  • BNC terminal connected in series with a voltage divider, to connect an oscilloscope.

According to IEC 60065 / 1998-07 § 10.1 and § 14.1 a Fig. 5a and Fig. 5b, EN 60065 / 1993 § 10.1 and § 14.1a Fig. 7a and Fig. 7b, DIN VDE 0860 / 1989-05 § 10.1, § 14.1a and § Fig. 7a and Fig. 7b

STM-200 Scratch Test Machine
Product Details

This device is used to determine the adherence and the durability of protective coverings on printed circuit boards and of insulating layers on accessible hazardous parts or metal parts. Built in strict accordance with IEC 60065 and IEC 60950.
SP-01 Scratch Pin Probe
Product Details

Used to test resistance to abrasion on insulating materials and conformal coatings. Hardened steel pin, the end is a cone having a top angle of 40 degrees, tip is rounded with a radius of 0.25 ± 0.02 mm. Complies with many Standards, including IEC based Standards. Entire scratch test apparatus available.

NOTE: Use this scratching pin with the STM-200 Scratch Test Machine for consistent, accurate and precise results.
SP-02 Scratch Pin Probe
Product Details

Scratching Pin Probe for IEC 60335-2-24 tests

NOTE: Use this scratching pin with the STM-200 Scratch Test Machine for consistent, accurate and precise results.
SET-50 Sharp Edge Tester
Product Details

The SET-50 is the industry standard for sharp edge testing. It has been chosen and published by UL as their preferred design! It consists of a clam shell type housing that fits into the palm of a hand and has a shorter arm. Sealed ball bearing have been added to reduce friction, and a new spring was installed to meet the latest UL force requirements. The unit comes in a protective storage box (not shown).
TC-3 Sharp Edge Accessory Kit
above: Tape Cap Kit
Product Details

  • 42 "tape caps" for SET-50
  • Tape Caps meet the latest UL, IEC, CE, ASTM, and other standards for tapes

CSW-01 Calibrated Stop Watch
Product Details

  • Timing Features:
    1. Single Action
    2. Time in / Time Out
    3. Continuous
  • Audible SPLIT/LAP & START/STOP indicator

Timing Capacity 9 hours, 59 minutes, 59 seconds, 99 hundreths Timing Increments 1/100 of a second
Display 0.3 " (0.7 cm) LCD Accuracy ±0.0003% full scale at 25° C
Case Water Resistant
AM-01 Angle Meter
above: AM-01 with magnetic base
Product Details

This handy device makes stability tests a snap. It consists of a plastic blue body encasing clear acrylic lens with easy increments 0-90 degrees in four quadrants. Includes strong magnetic base and metric rule one edge and English rule on other. Place on product and then tip product to the desired angle.
PRO-360 Digital Protractor
Product Details

This is our top-of-the-line angle meter, quality is unparalleled. A hold button freezes the reading on the display for hard to see measurements. Zero can be reset to any angle which provides for quick measurement comparisons. This "alternate zero" function also makes it easy to copy any angle setting for things like rafters, handrails, or items that need to be made parallel. The patented, easy, one button calibration resets accuracy to factory specifications with no special tools on any relatively level surface. Many uses including instant, accurate measurement of burn test required angles. It's small, light weight design is perfect for using in tight spaces. The rugged integral aluminum frame assures a product that will provide years of trouble free service. The Pro 360 ships with a 1 year warranty and a 9 volt battery in a hard plastic carrying case. It feels good knowing you have the best, the original Pro 360 Digital Protractor. Don’t accept knockoffs using this same model number - - buy from ED&D!
E-T2-70 Inclined Plane Device
Product Details

The Inclined Plane Device is used to determine the stability of electric appliances which are used on a table or on the floor. In accordance with IEC 60065, IEC 60335-1, IEC 60601-1 and IEC 60950.

Table Area: 1000 mm X 1000 mm
BD-50E ED&D Spark Tester
Product Details

With this product you can check the quality of your weld. This rugged tester is specifically designed for inspecting tank lining and for applications where continuous use is a necessity. The unit's high voltage transformer isolates it from the line power, so it runs cooler.
MRL-01 Mandrel
Product Details

The Mandrel is used to test non-separable thin sheet material (Constructional requirements with regard to Protection against Electric Shock) for IEC60950:2005 Annex AA & IEC60065:2005 Clause 8.22.

Educated Design & Development, Inc.


Cary, NC 27513 USA

Tel: 800-806-6236

Tel: (Int.) 001-919-469-9434

Fax: 919-469-5743

Educated Design & Development, Inc. © 2011 All Rights Reserved.
ED&D products are RoHS, REACH, and Conflict-Minerals Free

[Hipot Testers] [Ground Continuity Testing] [Leakage Current Testing] [Accessibility Probes] [Impact Testing]
[Temperature Measurement] [Voltage Current & Power Measurement] [Force & Torque Measurement] [Power Control]
[Loading Devices] [Flame & Other Plastics Testing] [Ingress Protection Testing] [Plug, Socket & Cord Testing]
[Breaking Capacity Testing] [Abnormal Testing] [Environmental Testing] [Creepage & Clearance Testing] [Other Safety Products]
[Safety Labels] [Toy Testing]