The Precision Iron Bar is built in exact accordance with IEC 60335-2-6; clause 22.115
. The iron bar is 2mm thick having dimensions approximately 100 mm x 20 mm. The bar is placed in the most unfavorable position on each cooking zone in turn. The controls are adjusted to their highest setting. For induction hob elements, the temperature rise of the bar shall not exceed 35 K. Other hob elements shall not operate.
ED&D utilizes ISO 2768-1
for tolerances, IEC/ISO 17025
compliant Certificate of calibration is included, measurement data is additional and protective cases are available.