Educated Design & Development has been named an
Model HP-2000 Automated AC/DC Digital Hipot Tester
1 button testing
- No setup required, just plug right in! Or, make a plug for your cordless product, and plug right in! EASY!
Easy to identify PASS / visible and audible FAIL indication
Auto Test Time (1 sec. / 60 sec.)
- No need to set a timer or stop watch
Safety Protected Start Switch -- Protects user from shock!
Performs the Low Current Ground Continuity test at the same time
UL, CSA, CE, EN, IEC, MIL
and all other international safety agency requirements as well as UL 120Kohm requirements
Accredited Calibration Certificate, accredited by ACLASS (Internationally accepted results - equivalent to A2LA)
TECH NOTE: We get numerous calls from users who are looking for AC hipot testers with high output current capabilities. In almost every case, the user actually needed a DC hipot tester. When hipot testing products that incorporate EMI filters (for EMC regulations),
you need to use DC, not AC!
With AC, the Y capacitors in the EMI filter will conduct current, causing false failure indications and possibly damaging these capacitors. Most "high-tech" standards anticipate this and permit DC testing at 1.414 times the AC test voltage. This includes
IEC950, IEC1010, and IEC601
0 - 3000 VAC True RMS
100 - 4250 VDC
± 1% Full Scale
50 - 60 Hz
100 - 200 or 220 - 240 VAC (Specify when ordering)
1 sec or 60 sec (selectable)
12" x 11" x 5"
ARC detection / Trip current limit 10 mA
if you require a 2 sec. / 60 sec. test time.
When purchasing our HP-2000, if you are requiring both 1 sec. and 60 sec. tests, please specifiy that you need selectable test time so that your unit can be configured accordingly.