Educated Design & Development has been named an
Model GC-1000 Automated Digital Ground Continuity Tester
1 Button Testing
- No setup required, just plug right in!
Digital LED display reads out in Ohms
Also performs the Low Current Ground Continuity test, at the same time!
Auto Test Time (1 sec. / 60 sec.)
- No need to set a timer or clock watch
Custom universal receptacle accepts both 120V and 240V plugs.
Zero feature allows you to "zero-out" the test lead impedance.
UL, CSA, CE, EN, IEC, MIL
and all other international safety agency requirements.
Note: In the standards, the 0.1 ohm limit is for the product under test's grounding system only, not including the power cord impedance. Our "zero" feature allows you to zero out the cord impedance. This ensures no false failures and extremely accurate results!
25A or 30A (selectable)
± 2% full scale
50 - 60 Hz
100 - 120 or 220 - 240 VAC
1 sec or 60 sec (selectable)
12" x 11" x 5"
0.1 ohm trip setting (0.2 ohm available)
if you require a 2 sec. / 60 sec. test time.
if you require a .200 Ω trip limit.