Educated Design & Development has been named an company.
Top

OTU Oscillating Spray Testers OTU Oscillating Spray Testers OTU Oscillating Spray Testers OTU Oscillating Spray Testers OTU Oscillating Spray Testers OTU Oscillating Spray Testers






Product Details
  • Completely adjustable tube height system allows moving the tube up/down to quickly establish the maximum 200 mm spacing from the spray nozzles as specified in the standards.
  • Completely adjustable tube mounting system = allows for different size spray tubes to be easily installed.
  • Folds to the wall when not in use (very beneficial)-the entire top beam and tube drive system has an integral heavy pin system that allows it to be folded to the wall in seconds after use = no far end tube support mouned to the floor!
  • Automated System = automatically stops tube rotation and water flow at the precise test time! Also includes manual mode for flexibility.
  • Dual Flow Gauges = allow for accurate reading of flow rate for the full range of tube sizes (small tubes use 0-1 L/min gauge; larger tubes use 0-5 L/min gauge).
System Electrical Ratings 120 or 240 VAC (order as needed),50-60 Hz., 15 A Operator Control Dimensions: 8.5 in. D x 20.5 in. W x 22.0 in. H (21.6 x 52.0 x 58.9 cm)
Oscillating Speed: 4 sec. for 2 x 120° for IPX3 (10 RPM)
12 sec. for 2 x 360° for IPX4 (10 RPM)
Operator Control Weight: 50 lbs. (11.3 Kg)
Oscillating Angles IPX3: 60° from center (120° total)
IPX4: 360° from center (near 360° total)
(Standard accepts lesser angle to allow room for sample support)
Water Control Dimensions 7.0 in. D x 29.0 in. W x 21.5 in. H (17.8 x 54.6 x 73.7 cm)
Tube Radius Size Options 200 mm, 400 mm, 600 mm, 800 mm, 1000 mm
(Larger system available for 1200 mm, 1400 mm, and 1600 mm tubes)
Water Control Weight 25 lbs. (11.3 Kg)
Drive System Dimensions 118.0 in. D x 20.5 in. W x 22.0 in. H (299.7 x 49.5 x 248.4 cm) Flow Meters 0-1 L/min
0-5 L/min
Drive System Weight 311 lbs. (141.0 Kg)